192900-0581 数据手册 - ITT Cannon（ITT科能）

Trident Neptune Cable Connectors with Metal Coupling RingFrom ITT Cannon, the Trident connector system is designed for use in harsh environments. With membrane wire seals and a strong metal coupling ring, this connector is ideal for use in outdoor electronics and automobile applications.### 注Cable mount plugs only mate with panel sockets and cable mount sockets only mate with panel plugs. Plugs accept pin contacts, Sockets accept socket contacts. ### ITT Neptune### NeptuneBased on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.Current Rating (single contact) | 13A signal contacts, 30A power contacts ---|--- Voltage Rating | 30V Contact Resistance | 5mΩ max Test Voltage | 2000V rms Insulation Resistance | 5000MΩ min. at 500V dc Operating Temperature | -55 → +120ºC Seals | Rubber Housings | Nylon to UL94 V-0 Coupling Rings | Nickel plated brass or plastic version Contacts | High conductivity copper alloy Contact Plating | Gold (contact area) Mating Cycles | Dimensions (mm) ---   | Shell 24 | Shell 16 | Shell 14 Dia mm | 43.2 | 30.5 | 28.5 Hole dia. to flat | 41.5 | 28.0 | 24.5