FCE17-A15SB-4E0 数据手册 - Amphenol（安费诺）

Amphenol Right Angle B Connectors These Amphenol Filtered D-Sub FCE17 Series Right Angle Pin or Socket connectors are PCB mounted.Filter Capacitance of 470 pF and 820 pF are available indicated by a 1or 4 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively #4-40 UNC threaded Jack Screw holes PCB Footprint B (10.29 mm) Boardlocks are Tin plated Copper alloy Insulation Resistance 3000 MΩ Contact Resistance 15 mΩ### 标准UL94V-0### Amphenol Filtered "D" ConnectorsThese filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide:Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way

FCC17 系列滤波母 D-sub 连接器滤波 D-sub 连接器，直角母型号，用于印刷电路板。 与公型号具有相同的功能和优点（代码优先 615-6200）。 与插入式型号具有相同的特性和性能。 --- 参照 Amphenol | 电容值 ---|--- **规格 E - 9 针** |   FCC17E09SB440 | 820 pF **规格 A - 15 针** |   FCC17A15SB490 | 5600 pF **规格 B - 25 针** |   FCC17B25SB440 | 820 pF ### ITT 过滤“D”型连接器ITT Cannon 的 D*JK 滤波连接器系列专门为商业应用而设计，这些应用需要极好的防电磁干扰和射频干扰保护焊接，直向印刷电路板和 90° 印刷电路板安装变型 锡抛光钢外壳结构 触点是铜合金，镍镀金 热塑性 UL94V-0 绝缘体 1000pF 滤波电容 ### D*JK 滤波连接器

Amphenol Right Angle B Connectors These Amphenol Filtered D-Sub FCE17 Series Right Angle Pin or Socket connectors are PCB mounted.Filter Capacitance of 470 pF and 820 pF are available indicated by a 1or 4 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively #4-40 UNC threaded Jack Screw holes PCB Footprint B (10.29 mm) Boardlocks are Tin plated Copper alloy Insulation Resistance 3000 MΩ Contact Resistance 15 mΩ### 标准UL94V-0### Amphenol Filtered "D" ConnectorsThese filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide:Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way