Amphenol（安费诺）
AMPHENOL FCE17-B25SA-410 滤波连接器, D-SUB, 直角, FCE17系列, DB, 插座, 25 触点, 470 pF, 钢主体
Amphenol（安费诺）
Amphenol 直向焊槽连接器这些 Amphenol 滤波 D-Sub FCE17 系列直向引脚或插座连接器采用带有焊杯尾线的面板安装。过滤器电容 470 pF、820 pF、1000 pF 或 5600 pF 在制造商部件号中可分别由 1、4、5 和 9 表示，例如 FCE17-*****-*X** 固定中心为 25 mm、33.3 mm、47 mm 或 63.5 mm 的 Ø3 mm 安装孔对应的尺寸分别为 E09、A15、B25 和 C37 带有无光泽锡镀层的焊槽接线端子可接受高达 20 awg 的线 绝缘电阻 3000 MΩ 触点电阻 15 mΩ### 标准UL94V-0### Amphenol Filtered "D" ConnectorsThese filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide:Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way
Amphenol（安费诺）
AMPHENOL FCE17-B25AD-250 连接适配器, D-sub, 1000pF, 标准 D Sub, 插头, 25 路, 标准 D Sub, 插座, 25 路
Amphenol（安费诺）
AMPHENOL FCE17-B25SM-250 滤波连接器, D-SUB, FCE17 Series, DB, 插座, 25 触点, 1000 pF, 钢主体
Amphenol（安费诺）
D-Sub Filtered AdaptorsThese Amphenol Filtered D-Sub FCE17 Series Male to Female Adapters are supplied with Mounting Posts.Filter Capacitance of 470 pF, 1000 pF or 5600 pF are available indicated by a 1, 4 and 9 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively Insulation Resistance 3000 MΩ Contact Resistance 15 mΩ Shells are Tin plated Steel Outside shells are Zinc Diecast Nickel plated #4-40 UNC threaded Mounting Posts ### 滤波 D 型适配器设计用于通过每个接地触点的 1000pF 电容器来限制电缆产生的电磁干扰 增强 VHF 和 UHF 波段中的抑制水平 钢底壳上的亮锡抛光屏蔽射频干扰/电磁干扰，密封式结构允许危险环境中的使用 镀金弯曲引脚触点 适合于军事应用、工业应用或者商业应用和计算机接口连接等等
Amphenol（安费诺）
25 位置 2.76mm 焊接 RA 通孔 端口 滤波 D-Sub
