TC7WBL125FK 数据手册 - Toshiba（东芝）

●逻辑类型Logic Type| 总线开关 Bus Switch \---|--- 电路数Number of Circuits| 输入数Number of Inputs| 电源电压VccVoltage - Supply| 静态电流IqCurrent - Quiescent (Max)| 单电源 Single Supply 输出高，低电平电流Current - Output High, Low| 2 V ~ 3.6 V 低逻辑电平Logic Level - Low| The TC7WBL126FK is a low on-resistance, high-speed CMOS 2-bit bus switch with low voltage operation. This bus switch allows the connections or disconnections to be made with minimal propagation delay while maintaining Low power dissipation which is the feature of CMOS. When output enable (OE) is at High level, the switch is on; when at Low level, the switch is off. P-MOS and N-MOS channel block also allows that the device is suitable for analog signal transmission. All inputs are equipped with protection circuits to protect the device from static discharge. Operating voltage: VCC = 2~3.6 V High speed operation: tpd = 0.25 ns (max) @3 V Ultra-low on resistance: RON = 5 Ω (typ.) @3 V Electro-static discharge (ESD) performance: ±200 V or more (JEITA) ±2000 V or more (MIL) High noise immunity: VNIH = VNIL = 28% VCC (min) Power-down protection for inputs and I/O terminals. Package: US8 高逻辑电平Logic Level - High| TC7WBL126FK是一个低导通电阻，高速CMOS 2位总线开关，低电压操作。这个总线开关允许以最小的传播延迟连接或断开，同时保持CMOS低功耗的特点。当输出使能（OE）为高电平时，开关处于打开状态。为低电平时，开关处于关闭状态。P-MOS和N-MOS通道块允许该设备适合于模拟信号的传输。所有输入都配有保护电路以保护设备免受静电放电。 工作电压：VCC= 2〜3.6 V 高速运行：TPD= 0.25NS（最大值）@3 V 超低导通电阻RON= 5Ω（典型值），3 V 静电放电（ESD）性能：±200 V或以上（JEITA）±2000 V以上（MIL） 高抗干扰性：VNIH= VNIL=28％VCC（分钟） 断电保护的输入和I/O端子。 包装：US8 传播延迟时间@Vcc，CLMax Propagation Delay @ V, Max CL| Description & Applications| 描述与应用|